Hyundai HYBC5200, Руководство пользователя

Страница: 24 / 40

Before starting work allow the engine to warm up. Once the engine has warmed up (2/3
minutes) you can apply the throttle. Press both the throttle lock and throttle lever together. To
adjust the amount of throttle partiality release the throttle lever only.
The throttle trigger can be locked into place by pressing the trigger lock button. To release the
trigger lock press and release the throttle trigger.
4. STOPPING PROCEDURE
4.1. Before stopping the machine allow the engine to cool down for a few minutes, by
allowing it to run without throttle.
4.2. You MUST allow the cutting head to come to a full stop before carrying out any
maintenance on the machine.
To STOP the machine release the throttle lever, allow the machine to cool down with no
throttle then move the power switch to the OFF position.
If not already in OFF position move the choke to the OFF position.
Page 24 Rev 3 - September 2016