Hyundai HYB60, Руководство пользователя

Страница: 13 / 20

6. OPERATING INSTRUCTIONS
6.1 During running-in period.
6.1.1. A new machine should not be run at high revs (full throttle off
load) for the first three tank fillings. This avoids unnecessary high loads during the
break-in period. As all moving parts have to bed-in during the running-in period, the
friction resistances in the engine are greater during this period. The engine will
develop its maximum power after about 5 to 15 tank fillings.
6.2. During operation.
6.2.1. After a long period of full-throttle operation, you must allow engine to run for a
while at idle speed so that the heat in the engine can be dissipated by flow of cooling
air. This helps to protect the engine mounted components such as ignition and
carburettor from thermal overload.
6.3. After finishing work.
6.3.1. Storing for short period:
6.3.1.1. Wait for engine to cool down. To avoid condensation, fill the fuel tank
and keep the unit in a dry place until you need it again.
6.3.2. Storing the machine for periods of 3 months and longer.
6.3.2.1 Drain and clean the fuel tank in a well ventilated area. Drain and clean
the container.
6.3.2.2. Run engine until carburettor is dry- this helps prevent carburettor
diaphragms sticking together.
6.3.2.3. Thoroughly clean the machine- pay special attention to the cylinder
fins and air filter.
6.3.2.4. Store the machine in a dry, high or locked location - out of the reach
of children and other unauthorized persons.
6.3.2.5. Do not expose the container to direct sunlight for unnecessarily long
periods. UV rays can make the container material brittle, which could result in
leaks or breakage.
Page 13 Rev 2