Led Indicator
Battery Pack
Red Led
Green Led
Action
Hot/Cold battery
Flashing
Flashing
Charging will
begin when
battery returns to
5°C-40°C
Defective
Flashing
OFF
Battery pack or
charger is
defective
Charging
ON
Flashing
Charging
Fully charged
OFF
ON
Charging is
complete
Maintenance
charging
5. INSERTING / REMOVING BATTERY PACK
Always switch off the tool before installing or removing of the battery cartridge. To
remove the battery cartridge, slide it from the tool while sliding the button on the
front of the cartridge. Always install the battery cartridge fully until the red
indicator cannot be seen. If not, it may accidentally fall out of the tool, causing
injury to you or someone around you. Do not use force when installing the battery
cartridge. If the cartridge does not slide in easily, it is not being inserted correctly.
5.1.
Inserting/removing battery pack.
5.1.1.
Insert battery cartridge, align the tongue on the battery cartridge with the groove in the
housing and slip it into place. Insert it all the way until it locks in place with a click. If you can
see the red indicator on the upper side of the button, it is not locked completely.
5.1.2.
To remove battery press battery unlock button (1) and slide in direction of arrow (2).
Page 7