N.B. The wheels are NOT intended for
on road
use
.
2.3.3.
To install the wheels.
2.3.3.1.
Slide the axle (2) through the wheel (1) from the outside then pass the
axle through the flat washer (3) and through the frame.
2.3.3.2.
Once axle is passed through the frame put the ‘P’ clip (4) through the axle
hole.
2.3.4.
To fit the rubber feet.
2.3.4.1.
Pass the bolt (9) through the rubber pad (8) and support (7).
2.3.4.2.
Pass the end of the M8 bolt (9) through the frame and secure it in place
with the M8 nut (6).
Page 9
Ver 2 - December 2016