Hyundai HX400L T3, Руководство по обслуживанию

Страница: 32 / 41

1-20
Model Type Boom Arm Counterweight Shoe Wheel Dozer Outrigger
HX400LT3
MONO
BOOM
Length [mm] Length [mm] weight [kg] width [mm] width [mm] Front Rear Front Rear
6500 2800 6200 600 - - - - -
A
B
·
: Rating over-front : Rating over-side or 360 degree
·
Note 1.
2.
3.
4.
Lifting capacity are based on ISO 10567.
Lifting capacity of the HX series does not exceed 75% of tipping load with the machine on firm,
level ground or 87% of full hydraulic capacity.
The Lift-point is bucket pivot mounting pin on the arm (without bucket mass).
*
Indicates load limited by hydraulic capacity.
Lift-point
height (A)
Lift-point radius (B) At max. reach
3.0 m (9.8 ft) 4.5 m (14.8 ft) 6.0 m (19.7 ft) 7.5 m (24.6 ft) 9.0 m (29.5 ft) Capacity Reach
m (ft)
9.0 m kg *9920 *9920 *10030 *10030 6.18
(29.5 ft) lb *21870 *21870 *22110 *22110 (20.3)
7.5 m kg *9520 7560 *9240 7470 7.54
(24.6 ft) lb *20990 16670 *20370 16470 (24.8)
6.0 m kg *10320 *10320 *9520 7500 *8880 6100 8.42
(19.7 ft) lb *22750 *22750 *20990 16530 *19580 13450 (27.6)
4.5 m kg *15300 *15300 *11830 10240 *10190 7240 8840 5380 8.96
(14.8 ft) lb *33730 *33730 *26080 22580 *22470 15960 19490 11860 (29.4)
3.0 m kg *13580 9590 *11070 6910 8630 5210 8310 5010 9.22
(9.8 ft) lb *29940 21140 *24410 15230 19030 11490 18320 11050 (30.2)
1.5 m kg *14980 9080 11200 6630 8490 5080 8180 4900 9.22
(4.9 ft) lb *33030 20020 24690 14620 18720 11200 18030 10800 (30.3)
0.0 m kg *15760 13420 15550 8790 10990 6440 8450 5040 8.98
(0.0 ft) lb *34740 29590 34280 19380 24230 14200 18630 11110 (29.4)
-1.5 m kg *10800 *10800 *20480 13460 *15440 8720 10930 6400 9220 5480 8.45
(-4.9 ft) lb *23810 *23810 *45150 29670 *34040 19220 24100 14110 20330 12080 (27.7)
-3.0 m kg *21330 *21330 *18540 13690 *14200 8850 *10690 6550 *10420 6450 7.6
(-9.8 ft) lb *47020 *47020 *40870 30180 *31310 19510 *23570 14440 *22970 14220 (24.9)
-4.5 m kg *14890 14170 *10950 9250 *10090 8740 6.27
(-14.8 ft) lb *32830 31240 *24140 20390 *22240 19270 (20.6)
※
Lifting capacities are based upon a standard machine conditions. Lifting capacities are based upon a standard machine conditions.
Lifting capacities will vary with different work tools, ground conditions and attachments.
Lifting capacities will vary with different work tools, ground conditions and attachments.
The difference between the weight of a work tool attachment must be subtracted.
The difference between the weight of a work tool attachment must be subtracted.
Consult with your local Hyundai dealer regarding the lifting capacities for specific work tools
Consult with your local Hyundai dealer regarding the lifting capacities for specific work tools
and attachments.
and attachments.
Failure to comply to the rated load can cause serious injury, death, or property damage. Make
Failure to comply to the rated load can cause serious injury, death, or property damage. Make
adjustments to the rated load as necessory for non-standard configurations.
adjustments to the rated load as necessory for non-standard configurations.