Hyundai HTX927, Руководство пользователя

Страница: 58 / 68

ENG - 58
SYSTEM SETUP
MENU OPERATION:
Press [SETUP] key for the screen to show the setup page. In setup mode, press [SETUP] key
again to quit the setup page. Press direction key to the desired item, and press [ENTER] to
confirm.
(1) Some setup items are concerning the present modes. The items in gray can’t be set up.
(2) The setup is memorized and will be kept after the power has been turned off.
GENERAL SETUP PAGE:
TV Display:
4:3 PANSCAN: When the unit connects to the normal TV set, the widescreen image shows on
the full screen, but some part is cut off.
4:3 LETTERBOX: When the unit connects to the normal TV set, the widescreen image shows
and black bars appear on the top and bottom of screen.
16:9: Use this item when the unit is connected with the wide screen TV set.
ANGLE MARK:
It will show the ANGLE mark when playing DVD disc with multi-angle view if selection is ON.
OSD LANG:
Select on-screen display language.
CLOSED CAPTIONS:
This function doesn’t work when the disc is without captions. If the caption is OFF, press [SUB -
TITLE] key on the remote controller to turn the captions on.
SCREEN SAVER:
If the SCREEN SAVER is set ON and the unit is switched on without a disc playing for several
minutes, a moving picture appears on the screen and the unit will go to standby mode after 20
minutes. You can press the [STANDBY]
key on the remote controller to activate.
LAST MEMORY:
When this function is ON, the unit can memorize the time elapsed from the last time you played
the disc. When playing next time, it will resume playing from the memorized time.
AUDIO SETUP PAGE:
ANALOG AUDIO SETUP:
DOWNMIX:
LT/RT: The audio out is Left and Right channel formatting even if the original sound is 5.1CH
format.
STEREO: The audio out format is stereo even if the original sound is 5.1CH format.
3D SURROUND: The audio out is virtual surround sounds (only for 5.1CH player)
5.1CH: Turn off DOWNMIX function. If playing 5.1CH discs or the unit is connected with 5.1
channel amplifier, this item should be selected.(only for 5.1CH player)
• FRONT, CENTER, REAR and SUB-WOOFER SPEAKER: (No this item in 2CH player)
If your speaker system includes the above speakers, you can set these items according the real
speaker status.
• DIALOG: The DIALOG mode is available, and you can press up and down direction key to
adjust it. (In the DOWNMIX mode, LT/RT or STEREO is selected.)
•
D.R.C
: The D.R.C can control data record. You can chose AUTO, ON and OFF in this mode.