11
Original instruction manual
Water Supply
Warning! NOT TO BE CONNECTED WITH HOT WATER.
■ the water pipe should be a minimum diameter of 19mm
■ the water supply speed must be greater than 6.2 minute litters.
■ Flow rate can be determined by filling a container in a minute.
■ the water temperature should not exceed 50 ° C
■ do not use water that contains solvent, such as thinner for paint, gasoline, oil, etc.
■ always use clean water to avoid putting dirt in the cleaner.
We strongly recommend that this cleaner should not be left running without the gun
trigger being engaged for a period of more than 5 minutes or more, it is necessary to
have circulating water in the pump to cool it off.
Warning:
Do not operate the machine with the engine running inside a room unless it is ventilated in
accordance with the standards prescribed by the competent national authority.
Warning:
Make sure that all emissions from the exhaust pipe are not near the air vent, air intake, and
ventilation.
Warning:
Always use good quality fuel
Содержание HNHPT220SP
Страница 2: ...Original instruction manual ...