Hyundai HLT 2601 HD, Инструкция по эксплуатации

Страница: 68 / 80

PC Mode
Installation
• Power off both Computer and Display before
making any connections.
• Set your PC’s resolution correctly before con
necting to the TV. See the table on page 76
for supported modes.
• Use a D-SUB cable to connect the TV’s PC
input to the computer’s RGB output terminal.
15 Pin Mini D-Sub Connector
• Tighten the screws of the Display cable until
the connectors are fastened securely (finger-
tighten only).
In TVmode, you can directly enter the PC
modevia pressing the PC button.
Menu System in PC mode
Press the “M” button. The menu will be displayed
in the middle of the screen.
PC Picture Position Menu
By pressing / button, select the first icon.
PC Picture Position menu appears on the
screen.
Autoposition
If you shift the picture horizontally or vertically
to an unwanted position, use this item to put
the picture into correct place automatically.
• Select Autoposition item by using /
buttons.
• Press or “OK” button.
Warning: Auto position adjustment recommen -
ded to be done with the full screen image
for the proper adjustment.
H (Horizontal) Position
This item shifts the image horizontally to right
hand side or left hand side of the screen.
• Select H Position item by using / button.
▪ Use / button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards
the top or bottom of the screen.
• Select V Position item by using / button.
• Use / button to adjust the value.
Dot Clock
Dot Clock adjustments correct interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs
or text in smaller fonts.
▪ Use / button to adjust the value..
Phase
Depending on the resolution and scan frequen -
cy that you input to the TV Set, you may
see a hazy or noisy picture on the screen. In
such a case you can use this item to get a
clear picture by trial and error method.
▪ Use / button to adjust the value.
PC Picture Menu
By pressing / button, select the second
icon. PC Picturemenu appears on the screen.
ENG - 68