Hyundai HLR28TS372SMART, Инструкция по эксплуатации

Страница: 94 / 137

English - 93 -
Power Up Mode
This setting configures the power up mode preference.
Last State
and
Standby
options are
available.
Virtual Remote
Enable or disable the virtual remote feature.
CEC
With this setting you can enable and disable CEC functionality completely. Press Left or
Right button to enable or disable the feature.
CEC Auto Power On
This function allows the connected HDMI-CEC compatible device to turn on the TV and switch
to its input source automatically. Press Left or Right button to enable or disable the feature.
Speakers
To hear the TV audio from the connected compatible audio device set as Amplifier . You can
use the remote control of the TV to control the volume of the audio device.
Show All Cookies (*) Displays all saved cookies.
Delete All Cookies (*) Deletes all saved cookies.
OSS Displays Open Source Software license information.
(*) These features may not be available depending on the model of your TV and the selected country in the First Time Installation .
Installation Menu Contents
Automatic
channel scan
(Retune)
Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations. Digital
Cable: Searches and stores cable DVB stations. Analogue: Searches and stores analogue stations.
Satellite: Searches and stores satellite stations.
Manual channel
scan
This feature can be used for direct broadcast entry.
Network
channel scan
Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial
network channels. Digital Cable: Searches for cable network channels.
Analogue fine
tune
You can use this setting for fine tuning analogue channels. This feature is not available if no
analogue channels are stored.
Satellite
Settings
Displays satellite settings. Satellite list: Displays available satellites. You can Add , Delete satellites
or Edit satellite settings on the list. Antenna installation: You can change satellite anntenna settings
and/or start a satellite scan.
Installation
Settings
(Optional)
Displays installation settings menu.
Standby Search(*):
Your TV will search for new or missing channels
while in standby. Any new found broadcasts will be shown. Dynamic Channel Update(*): If this option
is set as Enabled, the changes on the broadcasts such as frequency, channel name, subtitle language
etc., will be applied automatically while watching.
(*) Availability depends on model.
Setup Home
Transponder
Using this menu, you can edit the main and backup home transponder parameters, including the
Pid
of
the related M7 operator, which are used to download the channel list. Set your preferences and press
the Green button to save the settings. Then start an M7 operator installation using the Automatic
channel scan>Satellite
menu.
Clear Service
List
Use this setting to clear channels stored. This setting is visible only when the Country option is set to
Denmark, Sweden, Norway or Finland.
Select Active
Network
This setting allows you to select only the broadcasts within the selected network to be listed in the
channel list. This feature is available only for the country option of Norway.
First time
installation
Deletes all stored channels and settings, resets TV to factory settings.