background image

 
 
 
 

 

 

 

10

You will hear a busy tone if the other handset is not available. 
To end an internal call, press             or return the handset to the base 
cradle. 
 
You will be alerted with short beeps if you receive an external call during your 
intercom.   Caller information will be displayed if it is available.  You need to 
end the intercom first before you can answer the external call. 
 
 

During an external call 

Inquiry call  

1. Press 

 

INT

   

to put the external line on hold. 

2.  Press the handset number that you want to call. 
3.  After the other handset has answered, you can press  

INT

   

repeatedly to 

switch between the external line and the intercom. 

If the other handset does not answer, press   

INT

   

again to cancel the attempt 

and return to the external line. 
 

Call transfer  

While you are in an inquiry call with the other handset, press           or return 
the handset to the base cradle.  The call has now been transferred.  
 

Conference call  

While you are in an inquiry call with the other handset, press and hold   

CONF  

  

to set up a conference call between the external line and the 2 handsets. 
During the conference call, pressing   

CONF

   

will put the external line on hold 

and you can talk to the other handset in private.  Press and hold   

CONF

   

to 

establish the conference call again. 
Any handset hangs up during a conference call will leave the other handset 
still connecting with the external call. 
 

 

 

DEFAULT SETTING 

Default settings are as follow: 

Handset ringer melody:  1 
Handset ringer volume:  Level 3 
Base ringer melody:  1 
Base ringer volume:  Level 3 

Recall duration:  Duration 1 
Dial mode:  Tone 
Receiver volume:  Medium 
Key lock:  Off 
Message waiting indication:  Off 
 

• 

Settings not listed here are not affected by resetting. 

 
 
 
 
 
 

 
 

TROUBLESHOOTING 

 
Are you having trouble with your phone?  Here are some of the most 
common problems and solutions. 
 

Problems Solutions 

The phone does not work 
at all 
 

• 

Make sure that adapter and phone cord are 
connected properly.   

• 

Check that the batteries are fully charged 
and installed properly. 

• 

This phone does not work during power 
failure. 

The phone does not ring 
 

• 

Make sure the adapter and the phone cord 
are connected properly. 

• 

Move the handset closer to the base unit. 

• 

Make sure the handset (or base) ringer is 
turned on. 

There is no dial tone 
 

• 

Check that the phone cord is connected 
properly. 

• 

Check the handset is fully charged. 

• 

Move the handset closer to the base unit. 

CID does not work 
properly 
 

• 

Check with your local phone company that 
the CID service is subscribed to. 

• 

Let the phone ring at least once before 
answering. 

TROUBLESHOOTING

DEFAULT SETTING

 

Содержание HDT-L3












Отзывы: