Hyundai HDT-L23, Руководство пользователя

Страница: 25 / 27

The System
- 23 -
CHANGING THE SYSTEM PIN
The system PIN is used for registering, deleting handsets, and protecting the access rights to some
of the other menus. The pre-set system PIN is 0000. You can personalize the PIN for greater
security.
1. Press .
2. Select
SYSTEM
Æ
CHANGE PIN
. Press .
3. Enter the system PIN. Press to confirm. Use to make correction.
4. Enter the new system PIN. Press .
5. Enter the new system PIN again for verification.
6. Press . The new setting is saved.
SETTING LOW RADIATION MODE
You can set your phone to emit lower radiation power when the phone is inactive. Your phone will
return to normal power when you are using it again.
1. Press .
2. Select
SYSTEM
Æ
LOW RF POWER
. Press .
3. Select
ON
to activate low radiation mode or
OFF
to deactivate. Press to
confirm. The new setting is saved.
RESETTING TO DEFAULT SETTINGS
The default settings are the original factory settings of your phone. You can reset your phone
settings to factory default.
1. Press .
2. Select
SYSTEM
Æ
RESET
. Press .
3. Enter the system PIN. Press to confirm. The handset displays a confirmation
request.
4. Press to confirm. All settings have reset.
To find out what settings are being reset, see Default (pre-programmed) settings on page 24.
NOTE:
Forgotten PIN. Write down your PIN and save it for future use. If you
have forgotten the PIN, call your manufacturer for assistance.
NOTE:
After reset, your handset’s power switches off. It will switch back on in a
few seconds after updating all the settings.