IV. MAINTENANCE
Do not use rough and aggressive detergents!
Wipe the trimmer surface with a wet soft cloth.
Cleaning blades (fig. 5)
Clean the blades with the brush attached. For thorough cleaning, the entire trimming head
B
can be removed. When you want to re-attach it, put the plastic projection in the rear part
of the trimming head into the opening in the trimmer and re-attach the trimming head (snap
it in).
In order to keep the trimmer in a perfect condition, you have to lubricate the list with blades
using one or two drops of oil for sewing machines. Do not use hair oil, petroleum jelly or
oil mixed with petrol or any other solvent because after evaporation the solid parts of the
lubricant could slow down operation of the blades. Insert the trimming head to the trimmer
properly, turn on the trimmer and then turn it off and wipe out the excessive oil from the
blades.
Storage
Put the trimmer with the accessories back to the original package at a dry and dust free
place, out of reach of children and incapacitated people.
Removing the battery
Unscrew the 7 screws as shown in Fig.5 and remove the battery.
V. TECHNICAL DATA
Voltage (V)
specified on the type label
Trimmer weight (kg)
0.3
Appliance Protection Class
II.
Dimensions (H x L x W)
45 x 160x 40 (without attachments)
Noise level: Acoustic noise level of 69 dB (A) re 1pW.
Guarantee of 24 months does not apply to decrease in the accumulator’s effective capacity
caused by its use or age. Effective capacity gradually decreases depending on the method
of use of the accumulator.
The manufacturer reserves the right to change the technical specifications
and accessories for the respective models.
WARNING:
DO NOT USE THIS PRODUCT NEAR WATER, IN WET AREAS TO
AVOID FIRE OR INJURY OF ELECTRIC CURRENT. ALWAYS TURN OFF THE
PRODUCT WHEN YOU DON’T USE IT OR BEFORE A REVISION. THERE
AREN’T ANY PARTS IN THIS APPLIANCE WHICH ARE REPARABLE BY
CONSUMER. ALWAYS APPEAL TO A QUALIFIED AUTHORIZED SERVICE.
THE PRODUCT IS UNDER A DANGEROUS TENTION.
28 / 35
