
6.
unpack the product contents and remove all transport and packaging elements,
fi tting the side brushes,
set up the charging station,
charge the device’s rechargeable battery.
Side brushes assembling
Place the device upside down on the floor or table
Insert the side brush with the letter R into the hole with the letter R
Insert the side brush with the letter L into the hole with the letter L
If the brushes are properly installed, a click should sound
Charging battery station
For battery charging, the device’s charge contacts and the charging station must always be
clean. Wipe them with soft dry cloth from time to time to achieve it.
Install the charging station on a clean, level floor, back to the wall near the power socket.
There should be no obstacles on the way of device to the charging station. There should be
1.5-2 meters of free space, without furniture and other items before the charging station.
There should be no reflective surfaces (e.g. mirrors) behind the charging station.
Connect the adapter to the charging station, plug the adapter to the power socket.
Battery charging
Fully discharge and re-charge the battery every few months.
It takes about 12 hours to charge the battery before the device is turned on for the first
time, or if the device has not been used for a long time and 3-4hours for next charging. The
battery will be charged up to maximum level after 2-3 cycles of full charge and discharge.
If the device is completely discharged and cannot return to the charging station itself, put it
on the charging station manually.
The device returns to the charging station when the battery charge almost run down, where
the battery will be recharged automatically. The charging station should be connected with
power socket to do it.
Other way:Connect the power adapter directly to the machine and output.
The light indicator is orange when the device is charging, and green when the device is fully
charged
Preparation
The device cannot be used for long-pile carpets
Remove all objects which may get inside the appliance or cause an obstruction from the
floor before work starting.
Check no wires, cables, curtain brushes, or bags are one the way of the device.
Remove all items that may be dropped by the appliance (e.g. vases, small table lamps,
decorative items)
The device can pass the way between two objects if the distance between them is at least
40 cm.
The appliance may get stuck under pieces of furniture if they have a low fit. Block his way
with a pot of flower (for example) to avoid it.
Application setup
Make sure your smartphone or tablet is connected to 4G Wi-Fi Internet.
Make sure your smartphone or tablet runs on iOS 8.0 (or higher) or Android 4.4 (or higher).
Make sure your router's signal is within 2.4 GHz range.
Содержание H-VCRS03
