Hyundai H-VCH12, Инструкция по эксплуатации

Страница: 5 / 16

5
.

If the product has been exposed to temperatures below 0ºC for some time it should be
kept at room temperature for at least 2 hours before turning it on.

The manufacturer reserves the right to introduce minor changes into the product design
without prior notice, unless such changes influence significantly the product safety,
performance, and functions.

Manufacturing date is indicated on the unit and/or on packing as well as in
accompanying documents in the following format XX.XXXX where first two figures XX is
the month of production, and following four figures XXXX is the year of production.

The appliance should be used only with the power supply supplied with the appliance.

The instrument must be powered only by a safe, ultra-low voltage marked on the
instrument.
CHARGING

The device can be used for rooms cleaning from dust and small debris.

Unpack the device and remover sticker from body

Vacuum cleaner is battery operated. Connect the adaptor with device to charge the
battery, adaptor plug connect with power socket.

The indicator pulses while charging and stops to flash once is charged. Battery charging
time is 4-5 hours. Battery working time up to 40 minutes.

NOTE: Tube and turbo brush should be disassembled during the charging.
VACUUM CLEANER ASSEMBLING

Insert the tube to suction port of device and press down until click sound. Press a
release button to disconnect it from device.

Connect one of attachments with lower part of tube and press down until it clicks.
Vacuum cleaner can be used with and without the tube, connecting the brush with
device’s body. The device with a tube is used for basic cleaning. Handle vacuum cleaner
without the tube is used for additional cleaning.
ATTACHMENTS:
1.Turbobrush for wet cleaning

The vacuum cleaner kit includes a turbobrush-nozzle, which is used for cleaning carpets
from hair and wool. The nozzle is installed into the turbobrush. Turbobrush attachment-
removable element of the turbobrush.To install the turbobrush-nozzle, turn the wet
cleaning brush over, move the retainer to the open position, and install the turbobrush-
nozzle in the special slots.

Water tanks can be used for wet cleaning. They are located on a separate attached
module. Unscrew the black lids to pour water into the tanks, after filling the water screw
them back.To attach the tanks to the turbo brush remove the latch located in the center
of the module and attach it to the turbo brush on the back side, then release the latch to
lock the module with the tanks.

The floor cleaning cloth is attached with velcro (or with an elastic band) to the lower part
of the turbobrush. Water from the tank will be fed to the fabric automatically when
cleaning.
2.Crevice nozzle for hard to reach places cleaning and furniture nozzle for curtains.
3.Furniture cleaning are in the kit.

After charging the vacuum cleaner and installing the add-on, you can start working.