Hyundai H-VC1083, Инструкция по эксплуатации, Страница: 3 / 12

3
Do not make attempts to repair the appliance, adjust or replace parts in the vacuum cleaner. When malfunctions happen, contact the authorized service
center for examination, repair, electrical or mechanical adjustment.
Do not let the cord hang over edges or touch hot surfaces.
Before you start using the vacuum cleaner, please remove large or sharp objects from the floor in order to prevent the damage of the filter.
CAUTION: Never use the vacuum cleaner without the filters.
Vacuum cleaner assembling
Always remove the plug from the power supply before fitting or removing accessories.
Fitting flexible hose
Insert the flexible hose into the air inlet, press until it clicks into position. The hose itself could be extended to 3 meters
Hose removing
To remove flexible hose from the vacuum cleaner, push the buttons situated on the hose base and pull to remove it from the attachment point.
Fitting telescopic tube and accessories
Extend the telescopic tube to the desired length by pressing the button.
Insert a flexible hose into the telescopic tube.
Fit a nozzle to the telescopic tube:
- Universal floor brush is intended for cleaning bare floor and floor coverings.
- Furniture brush is for cleaning curtain or dust on the decorating surfaces.
- Sofa brush is for cleaning sofa
,
curtain.
- Crevice nozzle - to clean corners and between cushions.
Instruction for use
Before using the appliance, unwind a sufficient length of the cord and insert the plug into the power supply. The yellow mark on the cord shows the ideal
cord length. Do not unwind the cord beyond the red mark.
Press the On/Off button to switch the unit on. To stop it press the On/Off button again.
You can adjust the airflow using the airflow regulator on the flexible hose.
You can adjust the vacuum cleaner power using the power control on body.
- decrease power for cleaning curtains, books, furniture, etc.
- increase power for cleaning bare floor.
To rewind the cord, press the rewind button and guide the cord with hand to ensure that it does not whip causing damage.