Hyundai H-MW1320, Инструкция по эксплуатации

Страница: 9 / 33

9
3) Touch to start cooking. USE THESE SINGLE DIGIT TO REPRESENT POWER LEVELS
Button to tap % of power Microwave instruction
Tap once 100%
Tap twice 90%
P100 and P90 --- High power, 100% and 90% microwave power. Applicable for quick and thorough cooking
Tap thrice 80%
Tap 4 times 70%
P80 and P70 --- Medium High power, 80% and 70% microwave power. Applicable for medium express cooking
Tap 5 times 60%
Tap 6 times 50%
P60 and P50 --- Medium power, 60% and 50% microwave power. Applicable for steaming food
Tap 7 times 40%
Tap 8 times 30%
P40 and P30 --- Medium Low power, 40% and 30% microwave power. Applicable for defrosting food
Tap 9 times 20%
Tap 10 times 10%
P20 and P10 --- Low power, 20% and 10% microwave power. Applicable for keeping warm
Note:
1) Never use the Grill rack during microwave cooking.
2) Never operate the oven empty.
3) If you turn the food during operation, close the door and then touch the
key once and the preset cooking procedure will continue.
4) If you intend to remove the food before the preset time, you must touch key once to clear the preset procedure to avoid unintended operation of
next time use.
B. Two-stage Cooking
Some recipes require different stages of cooking at different temperatures.
1) SET STAGE 1:
Follow steps 1 and 2 in “One-stage Cooking”. DO NOT TOUCH
KEY
2) SET STAGE 2
Touch
Again to select a second power level (lower), then enter a second cooking time (Most 2-stage recipes use lower power for second stage.)
3) Touch key.
Note: After total time has elapsed, 4 beeps sound and END appears in display. Touch key or open the oven door to clear END before starting
another cooking function.
For example : You want to cook food with 100P microwave for 3 minutes then 20P microwave for 9 minutes, You may program your personalized menu as
follow:
STAGE 1:
1)After power-up, the colon flashes, ,then touch
once or wait for 30sec.
2) Touch key once, display will indicate 100P
3) Touch number keys “ 3” ,”0““0”in turn to set cooking time, display will indicate “3:00”