Hyundai H-MS2303, Инструкция по эксплуатации

Страница: 8 / 35

- 8 -
Installation of batteries
In the remote control
1. Remove the battery compartment cover.
2. Insert 1 CR2032 button cell correctly, so that the + and - polarities match the polarity diagrams in
the battery compartment.
Note: When the battery is exhausted, the remote control can no longer operate the system. Replace the
battery with a new one.
In the unit
1. Remove the battery compartment cover.
2. Insert two batteries (size AA) into the compartment correctly, so that the + and - polarities match the
polarity diagrams in the battery compartment to save all the options when you plug the unit off.
Notes:
Don’t use an old battery with a new one.
Don’t use different types of batteries together.
When the unit is not used for a long period of time, remove the batteries to avoid damage caused by
battery leakage and corrosion.
Connection
Connection of speaker boxes
Unwrap the speaker-cords of both speaker-boxes.
Please notice that each speaker cord consists of two wires, one is “clear”, the other has a black line.
Insert the “clear” wire of the left speaker-box into the red (+) speaker terminal on the right of the
main unit, which has the “L” indication (next to the speaker-connector).
Insert the black wire of the left speaker-box into the black (-) speaker terminal, which has the “L”
indication (next to the speaker-connector).
Repeat the above two steps for the right speaker box, but this time, inserting them into the red and
black terminals with the “R” indication.
When inserting each wire into a terminal, press downwards on the plastic knob (red or black part)
and push the exposed metal end of the wire all the way into the hole adjacent to this knob.
Place the speaker boxes as far apart as possible for best sound effect.
Power supply connections
This set is equipped with a “dc-jack” capable of accepting ac-adaptors with a rating of
DC = 12V, 5A, and with a plug with the following polarities as shown (center
positive):
Please use only the supplied ac-adaptor to operate the unit. Use of other adaptors may damage the
unit or cause it to malfunction.
Plug the tail end of the ac-adaptor into the dc-jack (socket) on the side of the main unit.
Make sure the voltage of the ac adaptor operates at the same voltage as your local household voltage.
Insert the plug at the end of the power cord into the wall ac socket.
Press ON/ STANDBY button to switch on the unit.
This unit is designed to operate without ever being totally powered “off”. It will either be “on” or in
“standby mode”.
In standby mode, the blue backlight of the digital display will be dimmed but the display will show
the current time (clock function).
Anytime during standby mode, you can switch “on” the unit by pressing ON/STANDBY button (on
remote control or front panel of the main unit).
Save energy by switching the system to standby mode.