Hyundai H-LCD900, Инструкция по эксплуатации

Страница: 8 / 21

8
Instruction manual
Select on-screen display language.
• Captions
This function doesn’t work when the
file is without caption. Select ON to make
caption on. The default setup is CAPTION
ON.
• Screen Saver
If SCREEN SAVER is set ON and the
unit is turned on without a file playing
for several minutes, a moving picture
appears on the screen, and the unit will
go to standby mode after several minutes.
• HDCD
You can select the digital filter at lx or
2x. The initial factory setup is off.
Dolby setup
• Dual Mono
Stereo: stereo output signal,
L-Mono: left output signal,
R-Mono: right output signal,
Mix-Mono: left and right output average
signal.
• Dynamic
If watching large dynamic scope movie
program at night, selecting this mode you
can reduce the volume to a very low level,
at the same time, to keep the fine details
sound. In this case, this doesn’t disturb
the family and keep the quality sounds.
Video setup
• Sharpness, Brightness, Contrast
You can set sharpness, brightness,
contrast, according to your preference.
Preference setup
• TV Type
This unit is suitable for all kinds of TV
systems. You can select one of the PAL,
NTSC or AUTO.
PAL: this system is used in CHINA,
EUROPE, HONGKONG etc.
AUTO: the TV system is auto switched
according to the disc system.
NTSC: this system is used in USA,
TAIWAN, JAPAN etc.
• Audio, Subtitle, Disc Menu
These are the initial settings by your
preference. If a setting is supported by
storage content, it will work. Otherwise
the file default value works.
General
Dolby digital setup
Dual mono
Dynamo
Dolby Video Preference
General
Video setup page
Sharpness
Brightness
Contrast
Dolby Video Preference
General
Preference
TV type
Audio
Subtitle
Disc menu
Parental
Password
Default
Dolby Video Preference