Hyundai H-DVD5090, Инструкция по эксплуатации

Страница: 11 / 33

11
Operation
Dolby setup
General Audio Dolby Video MP4sub Prefer.
Dolby digital setup
Dual mono
Dynamic
Dual Mono
Stereo: stereo output signal,
L-Mono: left output signal,
R-Mono: right output signal,
Mix-Mono: left and right output average
signal.
•
Dynamic
If watching large dynamic scope movie
program at night, selecting this mode you can
reduce the volume to a very low level, at the
same time, to keep the fine details sound. In
this case, this doesn’t disturb the family and
keep the quality sounds.
Video setup
General Audio Dolby Video MP4sub Prefer.
Video Setup Page
Component
TV mode
Sharpness
Brightness
Contrast
• COMPONENT
OFF: select if the unit is connected to
composite video display equipment.
YUV: set video output in analog component
video format when connecting to Y/U/V
terminals.
RGB: set video output in Red/Green/Blue
format when connecting to SCART terminals.
• TV MODE
changed the operation mode to USB and back
to Disc, the stop point of playback will not be
memorized.
Audio setup
General Audio Dolby Video MP4sub Prefer.
Audio Setup Page
Speaker setup
SPDIF setup
MIC
Echo Level
• Speaker Setup
DOWNMIX
LT/RT: The audio out is Left and Right
channels format even if the original sound is
5.1CH format.
STEREO: The audio out format is stereo
even if the original sound is 5.1CH.
OFF: Select when you use this player’s built-
in Dolby Digital decoder to play 5.1CH sound.
Front, Center, Rear speaker
If your speaker system includes the above
speakers, you can set these items according
the real speaker status. In karaoke On mode,
or downmix is not set to Off, these setup don’t
work.
Subwoofer
Turn the subwoofer ON or OFF.
Prologic II
Turn the Prologic II ON or OFF.
•
SPDIF Setup
SPDIF OFF: no digital signal out (coaxial
output off), only analog audio output.
SPDIF/RAW: no decoding on the amplifier
digital signal input.
SPDIF/PCM: the amplifier must be supported
by PCM decoding or Dolby digital decoding
function.
• MIC
Turn the microphone ON or OFF.
•
Echo level
Adjust the level of echo.