Hyundai H-DVD5036, Инструкция по эксплуатации

Страница: 18 / 50

H-DVD5036 ( www.hyundai-electronics.ru ) 18
Video setup
VIDEO OUTPUT
OFF: set video output to the composite.
YUV: set video output in analog component video format when connecting to Y/U/V terminals
RGB: set video output in Red/Green/Blue format when connecting to SCART terminals.
Note: If the video setting differs with the physical connection, the TV set may be without picture. In
case of no picture, you can RESET the machine, then keep pressing V-MODE button until the picture
is OK again.
RESOLUTION
Select a resolution: 480i, 576i, 720p(50Hz), 1080i(50Hz) or 1080p(50Hz). 1080p(50Hz) supported
by HDMI output only.
COLOR SETTING:
You can set the Sharpness, Brightness, Contrast, Gamma, Hue, Saturation, Luma delay according to
your preference.
HDMI SETUP
You can set it to ON if you need to make the HDMI signal to be available. When HDMI is set to ON,
the items VIDEO OUTPUT, TV DISPLAY and TV TYPE are unavailable.
Preference setup
TV TYPE
This unit is suitable for all kinds of TV systems. You can select one of the PAL, NTSC or Multi.
AUTO: the TV system is auto switched according to the disc system.
NTSC: this system is used in USA, Taiwan, Japan etc.
PAL: this system is used in China, Europe, Hong Kong etc.
PBC
To set PBC with On, Off. PBC On means the function is available, Off, no function.
AUDIO, SUBTITLE, DISC MENU LANGUAGE SETUP
These are the initial settings by your preference. If a setting is supported by disc content, it will work.
Otherwise the disc default value works. And these settings can be changed respectively by press the
AUDIO and SUBTITLE buttons when playing.
PARENTAL
The control level is for parental to control playing content and protect your children from violence
and erotic. The disc, the level of which is higher than the setting level can not be played.