10
Operation
Video setup
General
Video setup page
Component
Sharpness
Brightness
Contrast
Audio
Dolby
Video
Preference
•
COMPONENT:
Cvbs
•
SHARPNESS, BRIGHTNESS,
CONTRAST:
You can set sharpness,
brightness and contrast according to your
preference.
Preference setup
(available when
playback is fully stopped)
General
Preference page
TV Type
Audio
Subtitle
Disc menu
Parental
Password
Default
Audio
Dolby
Video
Preference
•
TV TYPE
This unit is suitable for all kinds of TV
systems. You can select one of the PAL, NTSC
or Auto.
Auto: the TV system is auto switched
according to the disc system.
NTSC: this system is used in USA, Taiwan,
Japan etc.
PAL: this system is used in China, Europe,
Hong Kong etc.
•
AUDIO, SUBTITLE, DISC MENU
LANGUAGE SETUP
These are the initial settings by your
•
SPDIF SETUP
: Spdif output
Spdif off: no digital signal out (optical or
coaxial output off), only analog audio output.
SPDIF/RAW: no decoding on the amplifier
digital signal input.
SPDIF/PCM: the amplifier must be supported
by PCM decoding or Dolby digital decoding
function.
•
MICROPHONE
You can switch the microphone on or off,
adjust the microphone volume and echo.
•
EQUALIZER
Several EQ modes are available. You can
select one according your preference and the
disc content.
•
REVERB MODE
You can select the Reverb mode: off,
Concert, Living room, Hall, Bathroom, Cave,
Arena, Church.
Dolby setup
General
Dolby Digital Setup
Dual mono
Dynamic
Audio
Dolby
Video
Preference
•
DUAL MONO
Stereo: stereo output signal,
L-Mono: left output signal,
R-Mono: right output signal,
Mix-Mono: left and right output average
signal.
•
DYNAMIC
If watching large dynamic scope movie
program at night, by selecting this mode you
can reduce the volume to a very low level and
at the same time keep the fine details sounds.
In this case, this doesn’t disturb the family and
keep the quality sound.