H-DVD5008-N (
www.hyundai-electronics.ru
) ENGLISH
15
System Setup
·
TEST TONE
With 5.1 operating choose On , will check 5 CHs in turn.
The checking must be done with no disc in the unit and under the condition of Downmix
being with 5.1CH . change 5.1 to OFF
Using this function can check all CHs if their linkage with sound box is correct or wrong.
·
DIALOG
With Audio output mode , and choose LT/RT stereo then under the Speaker Setup Page
you can select Dialog item and adjust volumes.
While playing 5.1CH disc, can adjust speakers volumes via dialog .
·
POST DRC
Dynamic compress output can lower volumes processing sound effect under the conditions of
within speakers max output. The item is divided into ON /OFF / AUTO .
SPDIF setup
·
SPDIF OUTPUT
SPDIF OFF:
no digital signal out (optical or coaxial output off), only analog audio output.
SPDIF RAW:
no decoding on the amplifier digital signal input.
SPDIF PCM:
the amplifier must be supported by PCM decoding or Dolby digital decoding
function.
·
LPCM OUTPUT
Select PCM frequency at 48kHz, 96kHz or 192 kHz
Note: some amplifier don't support 96kHz or 192kHz sampling and cause optical and coaxial
output abnormal.
The initial factory setup is 48kHz.
