Hyundai H-CMD7086, Инструкция по эксплуатации

Страница: 18 / 80

18
- Select a band (if needed)
- Select a station by pressing T-DN/T-UP buttons on the panel or PREVIOUS/NEXT buttons on the RC.
- Hold a Preset button (1-6), which you want store the station for at least 2 seconds.
To recall a station:
- Select a band (if needed)
- Press a Preset button (1-6) briefly to recall the stored station.
AF/MONO button
Press AF/MONO button to enable AF mode. Press and hold AF/MONO on the unit or press ST/MO on the RC
to choose MONO or STEREO.
Auto memory store
Select a band. Press AS/PS button on the panel and hold for 2 seconds to enter auto store mode. The radio will
automatically store 6 stations to the 6 preset memories of the current band. To stop auto store, press AS/PS
button again.
Preset scan
Select a band. Press AS/PS button on the panel or P.SCN/RPT button on the RC to scan all preset stations in the
memories of the current band. To stop preset scan, press the button again.
TA (Traffic Announcement) function
1. Press TA/DSP button shortly to turn on or turn off the TA function.
2. Press and hold for 2 seconds SEL button on the panel, press it shortly and repeatedly to select TA function.
Press VOL +/- buttons to select TA SEEK or TA ALARM mode.
3. When TA or TP RDS signal is available from the current station, TP icon is turned on. When TA/TP is
enabled (on), but no traffic announcement is transmitted, TP icon is off and TA icon keeps blinking.