Hyundai H-CDM8093, Инструкция по эксплуатации

Страница: 6 / 35

6
Installation/Connection
Connection
Connection diagram
ANTENNA
SOCKET
FUSE
B
A
ISO CONNECTOR
1
1
5
5
3
3
7
7
2
2
6
6
4
4
8
8
RCA OUT RIGHT (red)
RCA OUT LEFT (white)
Using the ISO Connector
Location Function
Connector A Connector B
1 - Rear Right(+)---Blue
2 - Rear Right(-)---Blue/White Stripe
3 - Front Right(+)---Grey
4 Battery 12V (+)/yellow Front Right(-)---Grey/White Stripe
5 Power Antenna/Orange Front Left(+)---Green
6 Panel light/White Front Left((-)---Green/White Stripe
7 ACC+/red Rear Left(+)---Brown
8 Ground/black Rear Left(-)---Brown/White Stripe
1. If your car is equipped with the ISO
connector, then connect the ISO connectors as
illustrated.
2. For connections without the ISO
connectors, check the wiring in the vehicle
carefully before connecting, incorrect connection
may cause serious damage to this unit.
Cut the connector, connect the colored leads
of the power cord to the car battery as shown
in the colour code table above for speaker and
power cable connections.
Panel light wire should be connected
to “+” of the side parking lights wire. Power
antenna wire is intended for power supply
of the antenna and for remote control of an
additional amplifier.