Hyundai H-CDM8055, Инструкция по эксплуатации

Страница: 22 / 56

22
Notes:
When you use LEFT/RIGHT cursor buttons to change the items, if you press LEFT cursor button in Speed dial interface, or press
RIGHT cursor button or T-MENU button in Ring volume interface, it will exit the current menu and the unit will return to the
previous mode.
Phone Book direct searching through the unit is only available for the mobile phone supporting Phone Book Download. Some
models of mobile phones don’t support Phone Book Download, if you try to download Phone Book from a mobile phone not
supporting this feature, “Reading…” will be displayed on the display for several seconds, then “Empty” will be displayed on the
display for several seconds. If there is no operation for several seconds, it will return to the previous mode automatically.
In Received list, Dialed list, Missed list, Phone book (Mobile Phone) and Phone book (SIM Card) menu, before the unit finishes
downloading the data from the mobile phone, “Reading…” will be displayed on the LCD. Once the download is completed,
“Reading…” will disappear and the phone number will be displayed.
Anytime pressing BAND/HANG UP/LOUD/SCH/CLR button you will exit T-MENU, and the unit will return to the previous
mode.
Speed dial
Display the speed dial phone number you have stored in the preset memory. The system can store maximum 10 numbers.
Note: At every system reset operation by pressing RESET button, the setup of Speed dial will be cleared.
1. Store speed dial numbers
There are two methods to storing the speed dial number into the memory.
a. Store from the Dialed list, Received list or Phone book.
b. Once found the number you want to save, press and hold number buttons (0~9); the unit will store the selected number into the
preset memory automatically. And you can hear a beep tone.
2. Store by manual input
a. Press T-MENU button and select Speed dial item.
b. Use UP/DOWN cursor buttons to scan memory available for store.
c. If any memory is available for input, the phone item is empty, and you can see the Memory No. (00-09) blinking on the LCD.
d. Press SEL/MENU button to enter the input interface. You can see “_” blinking on the display.
e. Use number buttons (0-9), */AS/PS button, #/SCAN button or UP/DOWN cursor buttons to input the number and press
SEL/MENU button to confirm the input. The cursor “_” will skip to the name you want to store, press SEL/MENU button to confirm.