Hyundai H-CDM8035, Инструкция по эксплуатации

Страница: 7 / 50

7
2. DIN REAR-MOUNT (Method B)
For this method, use the screw holes in the lateral sides of the unit. Fix the unit with the help of the factory radio mounting brackets.
1. Select a position in which the screw holes of the brackets (3) are aligned with the screw
holes in the unit body, and screw in two screws (2) in each side.
2. Screw.
3. Factory radio mounting brackets.
4. Vehicle dashboard.
5. Lock (remove this part).
Note: The outer trim frame and mounting sleeve are not used for method of installation.
Installing the front panel
Insert the right side of the panel, and then press on the left side until the click.
To detach the front panel, press REL button.
Anti-theft system
The front panel of this unit can be stored in the included protective case when not in used and carried away when you leave the
vehicle to deter theft.
Switch off the power of the unit. Detach the front panel, then put it to the protective case and take it with you.
Caution: The control panel can easily be damaged by shocks. After removing it, place it in a protective case and be careful not to
drop it or subject it to strong shocks.
The rear connector that connects the main unit and the control panel is an extremely important part. Be careful not to damage it by
pressing on it with fingernails, pens, screwdrivers, etc.
Note: If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in isopropyl alcohol to
clean the socket on the back of the control panel.