6
Attaching the control panel
1. Insert the left side of the control panel into the main unit (pic. 3).
Note:
the control panel must be attached into the T-Joint.
2. Press the right side of the control panel until a “click” sound is heard.
3. Close the panel.
Caution:
DO NOT insert the control panel from the right side. It can damage the control panel.
The control panel can easily be damaged by shocks. After removing it, place it in a protective case and
be careful not
to drop it or subject it to strong shocks.
The rear connector that connects the main unit and the control panel is an extremely important part. Be careful not to
damage it by pressing on it with fingernails, pens, screwdrivers, etc.
Note:
If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in isopropyl alcohol to clean
the socket on the back of the control panel.
Pic. 3
