Hyundai H-AS1204i, Инструкция по эксплуатации

Страница: 3 / 9

3
Instruction manual
Utilization of the product
If you want to dispose this product, do not
mix it with general household waste. There is a
separate collection system for used electronic
products in accordance with legislation that
requires proper treatment, recovery and
recycling.
Please contact your local authorities for
the correct method of disposal. By doing so,
you will ensure that your disposed product
undergoes the necessary treatment, recovery
and recycling and thus prevent potential
negative effects on the environment and
human health.
Important safeguards
• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer the manual.
Keep the manual for use in future.
• Do not hit or drop the unit.
• Do not expose the unit to vibration,
direct sunlight, too high or low temperature or
humidity.
• Do not disassemble the unit yourselves.
Refer servicing to qualified service personnel.
Power supply
• The appliance is for household use only.
• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds the mains voltage in your home.
• Insert the power cord into the AC socket,
then connect its plug to the power supply. Use
the supplied adaptor only.
General operations
Power on/off
• When the unit is connected to the power
source, set ON/OFF switch to On position; the
unit will go to standby mode and the display will
show 00000 at a low brightness level. Press
STBY button to switch the unit from standby
mode, and the display will show information at
a high brightness level.
• To switch the unit to standby mode, press
STBY button. To switch off the power of the
unit set ON/OFF switch to OFF position.
Volume
Press VOL+ and VOL- to adjust the sound
volume level. Press MUTE button to mute the
sound, press this button again to resume the
sound.
Modes
Press MODE button repeatedly to select
an operation mode (the display will show
corresponding icon herein given in brackets):
external audio device from the line input (AUX)
=> FM radio (FM) => iPod/iPhone (IPOD).
Radio operation
In the radio mode the display shows FM icon
and the current frequency. Press and hold
/SCAN- or
/SCAN+ button to search the
nearest available station downwards or up-
wards. Press these buttons shortly repeatedly
to adjust the frequency step by step.
• To ensure a better signal reception,
connect an external FM antenna to the ANT
input on the back panel.
iPod/iPhone docking
• Connect your iPod or iPhone to the jack. Be
careful, the jack can be easily damaged. Ensure
the connection is good for a better contact.
• The battery of the connected device will be
automatically charged by the power of this unit.
• After inserting the iPod/iPhone the unit