Hyundai H-ALMO2-16H2/O, Инструкция по эксплуатации и гарантийный талон

Страница: 9 / 53

9.
Electric air conditioner (split system)
EN
APPLIANCE CONTROL
The conditioner may be controlled from a remote control board or from an indoor unit control
panel.
If the remote control board is lost or cannot be used at the moment, you may use a control
button «on/off» located behind the front panel.
For that, open the front panel carefully by pulling it from the left and right.
1. Press this button once to activate the automatic mode.
2. Press this button again within 5 sec after the first pressing to switch the air conditioner to the
forced cooling mode.
3. Close the front panel.
The front panel of air conditioner there is a display that shows the current temperature and
defined, and indicators * display modes and settings: power, night mode, temperature, timer,
compressor operation (see Fig. 3**).
The front panel of the conditioner comprises a display showing specified and current tempera -
ture, as well as indicators* reflecting modes and parameters of work: power supply, sleep mode,
temperature, timer, compressor operation (see Fig. 3**).
* Presence of this function depends on the delivery lot.
Fig. 2. Description of indoor unit control panel
Caution!
Use this button only in case of extreme necessity. Use the remote
controller, whenever possible.
8. Tube for condensate removal*.
9. Air-outlet grille of the outdoor unit.
10. Conditioner unit for outdoor installation.
11. Air-intake grilles of the outdoor unit.
* not supplied