Hyundai H-1443, Инструкция по эксплуатации

Страница: 3 / 13

2 3
Instruction manual Instruction manual
General operations
• To select the needed sound source set
FUNCTION switch to the corresponding
position: AM/FM/TAPE/CD(AUX).
• Adjust the sound volume level by rotating
VOLUME regulator.
• To switch off the unit, set FUNCTION
switch to TAPE position.
AUX in jack
You can connect the audio output of an
external device (such as a CD-player) to
this unit, to listen to the sound of that device
through the amplifier of this unit.
• To connect an external audio device (eg.
MP3 player), please use a standard stereo
cable (not included) with 3.5 mm to 3.5 mm
plugs to connect the headphone out or audio
line-out of the external device to the AUX input
socket of this unit.
• Slide FUNCTION switch to CD/AUX
position.
• Turn on the external device.
Headphone jack
• For private listening, insert 3.5-mm
headphone into the stereo headphone jack.
• Adjust volume to the appropriate level as
desired.
• When the stereo headphone jack is
plugged, speaker will disconnect automatically.
Radio operations
• Set FUNCTION switch to AM or FM position.
• Rotate TUNING regulator to tune to the
desired station.
• To turn off the radio, set FUNCTION
switch to a different position.
Important safeguards
• Attention: The Instruction manual
contains important operating and maintenance
instructions. For your safety, it is necessary to
refer to the manual.
• Dangerous voltage: Uninsulated
dangerous voltage that may be of sufficient
magnitude to constitute a risk of electrical
shock to persons is present within this product
enclosure.
• Caution: To reduce the risk of electric
shock, do not dismantle the body. Prefer
servicing to qualified service personnel. Do not
use the unit in places where it can be exposed
to water, moisture and dust. Make sure that
pins or other foreign objects do not get inside
the unit; they may cause malfunctions, or
create safety hazards such as electrical shock.
Power supply
Battery operation
• Open the battery compartment cover.
• Insert 8 x UM-1/LR20 “D” size batteries.
Please observe correct battery polarities or the
set will not work.
• Close the battery compartment cover.
AC operation
• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds to the mains voltage in your home.
• Plug the corresponding end of cord into
the AC socket on the rear of the set.
• Insert the plug into power supply.
Caution:
• When the set is only used with AC or is
not used for 2 weeks or more, please remove
the batteries, to avoid damage to the set from
leakage of batteries.
• Always switch off the unit when not in use.
• Always unplug the appliance from power
supply, when no use long time.