Hyundai H-1427, Инструкция по эксплуатации

Страница: 3 / 13

2 3
Instruction manual Instruction manual
General operation
• To select the needed sound source set
FUNCTION switch to the corresponding position
(CD/USB/TAPE/FM/AM).
• Adjust the sound volume level by rotating
VOLUME regulator.
• To switch off the unit, set FUNCTION
switch to TAPE position.
Radio operation
• Set FUNCTION switch to AM or FM position.
• Rotate TUNING knob to receive the
desired station.
• To turn off the radio, set FUNCTION
switch to TAPE position.
Antenna
• For FM reception, adjust the telescopic
antenna appropriately to obtain the best
reception on the band selected.
• The AM signal is picked up through the
built-in antenna. The set should be placed to a
position for the best reception.
Headphone jack
• For private listening, insert 3.5 mm
headphone into the stereo headphone jack.
• Adjust volume control to the appropriate
level as desired.
• When the stereo headphone jack is
plugged, speaker will disconnect automatically.
CD/MP3 operations
Playing discs
• Set FUNCTION switch to CD/USB
position. The display becomes active.
• Open the CD door by lifting the grip on the
CD compartment cover. Put a CD into the CD
compartment with the label side upwards and
Important safeguards
• Attention: The Instruction manual
contains important operating and maintenance
instructions. For your safety, it is necessary to
refer to the manual.
• Dangerous voltage: Uninsulated
dangerous voltage that may be of sufficient
magnitude to constitute a risk of electrical
shock to persons is present within this product
enclosure.
• Caution: To reduce the risk of electric
shock, do not dismantle the body. Prefer
servicing to qualified service personnel. Do not
use the unit in places where it can be exposed
to water, moisture and dust. Make sure that
pins or other foreign objects do not get inside
the unit; they may cause malfunctions, or
create safety hazards such as electrical shock.
Power supply
Battery operation
• Open the battery compartment cover.
• Insert 8 x UM-2/LR14 “C” size batteries.
Please observe correct battery polarities or the
set will not work.
• Close the battery compartment cover.
AC operation
• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds the mains voltage in your home.
• Plug the corresponding end of cord into
the AC socket on the rear of the set.
• Insert the plug into power supply.
Caution:
• When the set is only used with AC or is
not used for 2 weeks or more, please remove
the batteries, to avoid damage to the set from
leakage of batteries.
• Always switch off the unit when not in use.
• Always unplug the appliance from power
supply, when no use long time.