Hyundai H-1417, Инструкция по эксплуатации

Страница: 4 / 15

3
Instruction manual
remove the batteries, to avoid damage to
the set from leakage of batteries.
• Always switch off the unit when not
in use.
• Always unplug the appliance from
power supply, when no use long time.
Radio operation
• Set FUNCTION switch to RADIO
position.
• Select your desired broadcasting
band with BAND switch: FM or AM.
• Rotate TUNING knob to receive the
desired station.
• Adjust the level of sound with
VOLUME knob.
• To turn off the radio, set FUNCTION
switch to TAPE (OFF) position.
Antenna
• For FM reception, adjust the
telescopic antenna appropriately to obtain
the best reception on the band selected.
• The AM signal is picked up through
the built-in ferrite antenna. The set should
be placed to a position for the best
reception.
Headphone jack
• For private listening, insert 3.5 mm
headphone into the stereo headphone jack.
• Adjust volume control to the
appropriate level as desired.
• When the stereo headphone jack
is plugged, speaker will disconnect
automatically.
Important safeguards
• Attention: The owner’s manual
contains important operating and
maintenance instructions. For your safety,
it is necessary to refer to the manual.
• Dangerous voltage: Uninsulated
dangerous voltage that may be of
sufficient magnitude to constitute a risk
of electrical shock to persons is present
within this product enclosure.
• Caution: To reduce the risk of electric
shock, do not dismantle the body. Prefer
servicing to qualified service personnel.
Do not use the unit in places where it
can be exposed to water, moisture and
dust. Make sure that pins or other foreign
objects do not get inside the unit; they
may cause malfunctions, or create safety
hazards such as electrical shock.
Power supply
Battery operation
• Open the battery compartment cover.
• Insert 8 x 1.5V UM-2 R14 “C” size
batteries. Please observe correct battery
polarities or the set will not work.
• Close the battery compartment cover.
AC operation
• Before the first connecting of the
appliance check that voltage indicated on
the rating label corresponds the mains
voltage in your home.
• Plug the corresponding end of cord
into the AC socket on the rear of the set.
• Insert the plug into power supply.
Caution:
• When the set is only used with AC or
is not used for 2 weeks or more, please