Hyundai H-1408, Инструкция по эксплуатации

Страница: 6 / 15

5
Play/pause mode
Press the PLAY/PAUSE button to start play, the LCD display will show the first track and PLAY icon.
Press the Play/Pause button to pause at any track when playing, PLAY icon on the CD display flashed.
To stop the CD, press the STOP button.
If the disc contains folders with files, select a folder by pressing SKIP+10/FOLDER button. Also, press this button to skip 10 tracks forward.
Skip and search mode
Press the NEXT button once to skip to the next track.
Press the BACK button once to skip back to previous track.
Press and hold the BACK/NEXT buttons to start fast backward or forward playback until you find the passage to play from.
Repeat mode
Press the REPEAT/PROG button once for single track repeat playing.
Press REPEAT/PROG button twice for all track repeat playing.
To cancel repeat play, press REPEAT/PROG button once again.
Program mode
Up to 20 tracks can be programmed for disc play in any order or the same track can be repeated up to 20 times. Before use, be sure to press the STOP
button.
Press the REPEAT/PROG button, the memory position number will flash on the display.
Select a desired track by using the BACK/NEXT buttons.
Press the REPEAT/PROG button to confirm.
Repeat the two last steps as described above to enter additional memories into the program if necessary.
When all the desired tracks have been programmed, press PLAY button to play the disc in the order you have programmed.
To stop the CD, press the STOP button.
NOTE: The program memory will be cleared only when the CD compartment is opened or turn off the CD or power supply.
To remove the CD from the unit open the CD door.
To turn off the CD player set FUNCTION switch to TAPE (OFF) position.
Note: Good quality sound is guaranteed only when playing licensed discs.
Recording
Recording from radio
Set the FUNCTION switch to RADIO position.
Tune to the desired station by turning the TUNING control regulator.
Insert a blank cassette into cassette compartment.