Hyundai FLA32486, Инструкция по эксплуатации

Страница: 54 / 83

Getting Started
English - 53 -
1 2 3
4 5
6
0
LANG.
BACK
MENU
OK
EXIT
Q.MENU
/
V
/
V P
P
7 8 9
.,/@
Remote Control
1. Standby: On / Off switch of the TV
2. Numeric buttons: Used to navigate channels and
enter passwords, text etc.
3. TV: Displays channel list / Switches among broadcast
types
4. Mute:
Completely turns off the volume of the TV
5. /-
6. Menu:
Displays TV menu
7. Navigation buttons:
Helps navigate menus, content
etc. and displays the subpages in TXT mode when
pressed Right
8. OK: Confirms user selections, holds the page (in TXT
mode), views channel list (DTV mode)
9. Back: Returns to previous screen, opens index page
(in TXT mode)
10. Media browser:
Opens the media browsing screen
11. Info:
Displays information about on-screen content,
shows hidden information (reveal - in TXT mode)
12. My button 1 (*)
13. Coloured Buttons
14. Language:
Switches between sound modes
(analogue TV), displays and changes audio/subtitle
language (where available)(digital TV)
15. Subtitles: Turns subtitles on and off (where available)
16. Rapid reverse: Moves frames backwards in media
such as movies
17. Record:
Records programmes
18. Play:
Starts to play selected media
19. Stop:
Stops the media being played
20. Rapid advance:
Moves frames forward in media
such as movies
21. Pause: Pauses the media being played, starts
timeshift recording
22. Screen: Changes the aspect ratio of the screen
23. Text: Displays teletext (where available), press again
to superimpose the teletext over a normal broadcast
picture (mix)
24. My button 2 (*)
25. EPG (Electronic programme guide):
Displays the
electronic programme guide
26. Exit: Closes and exits from displayed menus or
returns to previous screen
27. Quick Menu: Displays a list of menus for quick
access
28. No function
29. Pro/-
30. Swap:
Quickly cycles between previous and current
channels
31. Source:
Shows all available broadcast and content
sources
Using My button 1
Press MY BUTTON 1 for five seconds when on a desired source,
channel or link, until the “MY BUTTON IS SET” message is
displayed on the screen. This confirms that the selected MY
BUTTON is now associated with the selected function.
Using My button 2
Press MY BUTTON 2 for five seconds when on a desired source,
channel or link, until the “MY BUTTON IS SET” message is
displayed on the screen. This confirms that the selected MY
BUTTON is now associated with the selected function.