Hyundai Excellence H-DVD5017, Инструкция по эксплуатации, Страница: 13 / 53

12
Connection
Precaution: Do not turn on the power of the player before all connections are done correctly.
Note: The diagram may be different from your DVD player; the connections are only for your
reference.
Connecting to TV
DVD player video input mode
Set up your DVD player video output mode according to the specification of your TV system. Press
P/N button on the remote control to select: PAL/Auto/NTSC.
Y/Cb/Cr video connection
Connect the Y/Cb/Cr output jack of the DVD player to the Y/Cb/Cr input jack of the display with a
Y/Cb/Cr cable. Press the VIDEO button to switch the video output to YUV interlace signal output
mode. Switch the TV input mode to Y/Cb/Cr.
Y/Pb/Pr video connection
Connect the Y/Pb/Pr output jack on the DVD player to the Y/Pb/Pr input jack of the display with a
Y/Pb/Pr cable. Press the VIDEO button to switch the video output to YUV progressive signal output
mode. Switch the TV input mode to the relevant mode. Press VIDEO button; the screen will change
from interlace to progressive output mode. Press again the VIDEO button to start normal operation.
S-Video connection
Connect the S-Video output jack on the DVD player to the S-Video input jack of the display with an
S-Video cable. In this mode, there is no need to perform setting in setup menu.
VGA connection
Connect the player to the display with a VGA cable if you need the VGA output mode. If the video
input of the DVD player is in the interlaced output mode, select VGA in the Component menu, press
PLAY button and restart the player, then the video out is switched to VGA output mode
automatically.
When the video output of the DVD player is in Y/Pb/Pr output mode, select VGA in the Component
menu and then press PLAY button to switch to the VGA output.