Hyundai EXCELLENCE H-CMD4013, Инструкция по эксплуатации

Страница: 22 / 73

22
Loading a disc
Turn the power on, Press OPEN button on the panel to open the front panel. Insert the disc with the printed side
facing upward into the slot. Close the front panel. The disc will play automatically.
To eject the disc, first press OPEN button to open the front panel. Press EJECT ( ) button on the base to eject
the disc. Close the front panel.
Note: If a disc is left in the ejected position for several seconds, the disc is automatically reloaded. If you force
a disc into before auto reloading, this can damage disc.
Inserting the SD/MMC card and USB device
Insert an SD/MMC card or USB device into SD/MMC compartment (when the front panel is open) or USB
socket respectively. Then the playing mode will be changed into SD/MMC or USB mode automatically. The
first card/USB device track playback will start.
When SD/MMC card and USB device are both inserted into their compartment or socket, the playing mode will
be changed into the mode of the later one. You can select the source using PWR/MOD button on the RC or
POWER/MODE button on the panel.
To eject the SD/MMC card from the slot, press it, then take it out.
Note: This unit supports USB drivers and memory cards with up to 2 Gb.
Playing/pausing
To ensure good system performance, wait until the unit finishes reading the disc information before proceeding.
After inserting the disc, playback will start automatically. Or press PLAY/PAUSE button on the panel or
ENTER/PLAY button on the RC to start playback. Press PLAY/PAUSE button on the panel or PAUSE button
on the RC to go into pause mode. In pause mode press it again or press PLAY/PAUSE button on the panel or
ENTER/PLAY button on the RC to resume the playback.