Hyundai Elite i20, Руководство пользователя

Страница: 220 / 400

#
!'%$&%" '&$
IInformation
- Using the iPod
®
Devices
• To use the audio system’s iPod
®
con-
trol function, use the dedicated
cable provided with your iPod
® .
• Connecting the iPod
®
to the vehicle
during play may result in a loud
noise that lasts about one to two sec-
onds. Connect the iPod
® to the vehi-
cle after stopping or pausing play.
• Connect the iPod ® with the vehicle in
the ACC ON state to begin charging.
• When connecting the iPod
®
cable,
be sure to fully push the cable into
the port.
• When Equalizer effects are enabled
simultaneously on external devices,
such as iPod
® s and the audio sys-
tem, the Equalizer effects may over-
lap, causing sound quality deterio-
ration or distortion. Deactivate the
Equalizer function for all external
devices, if possible.
• Noise may occur when your iPod
®
or the AUX port is connected.
Disconnect and store separately
when not in use.
(Continued)
(Continued)
• There may be noise if the audio sys-
tem is used with an iPod
®
or AUX
external device connected to the
power jack. In these cases, discon-
nect the iPod
® or external device
from the power jack.
• Play may be interrupted, or device
malfunctions may occur depending
on the characteristics of your
iPod
®
/iPhone
®
/iPad
®
.
• Play may fail if your iPhone ® is con-
nected through both Bluetooth ® and
USB. In this case, select Dock con-
nector or Bluetooth
®
on your
iPhone
®
to change the sound output
settings.
• If your software version does not
support the communication proto-
col or your iPod
® is not recognized
due to device failure, anomalies or
defects, iPod
®
mode cannot be used.
• iPod ® nano (5th generation) devices
may not be recognized if the battery
is low. Charge sufficiently before use.
(Continued)
(Continued)
• The search and song play order in
the iPod
®
device may be different
from the search order in the audio
system.
• If the iPod
®
has failed due to an
internal defect, please reset the
iPod
®
(consult your iPod
®
manual).
• Depending on the software version,
the iPod
®
may fail to sync with the
system. If the media is removed or
disconnected before recognition, the
previous mode may not be restored
(iPad
®
cannot be charged).
• Cables other than the 1-meter cable
provided with iPod ® /iPhone ® /iPad ®
products may not be recognized.
• When other music apps are used on
your iPod ® , the system sync func-
tion may fail due to malfunction of
the iPod
®
application.
i