Genuine Accessories
Coin or Flat-Head Screwdriver
6
N
O
T
E
Step Ladder, Tape Measure, Wrench, 5mm Allen Wrench and Torque Wrench
Do NOT over-torque the bolts.
A. Using a tape measure, confirm the load carriers protrusion on the left and right sides are equal on both crossbars as shown.
B. Using the provided wrench, snug all four (4) bolts as shown.
C. Using a 5mm Allen wrench and torque wrench, torque the driver's side front and rear crossbar bolts to:
3.00 N.m (30.60 kgf-cm, 26.55 lbf-in)
. Repeat on the passenger's side.
D. Torque the passenger's side front and rear crossbar bolts to:
6.00 N.m (61.20 kgf-cm, 53.00 lbf-in)
. Repeat on the driver's side.
E. Ensure all four (4) bolts are properly torqued and that the brackets are properly seated onto the roof side rails as shown.
A. Carefully align and reinstall all four (4) foot covers. Turn the plastic cylinders clockwise as shown to lock the foot covers in place.
NOTE:
Ensure the foot covers are properly seated and locked.
5
N
O
T
E
Do NOT scratch or damage the vehicle.
5560668001
Revision Date
01/28/2021
Page 5 of 6
