Hyundai CRM1231R, Инструкция по эксплуатации

Страница: 48 / 68

ENG - 48
GENERAL OPERATION
Power On/Off Button
Press the POWER button to turn the unit on when the vehicle ignition switch is on. Press and
hold the button to turn the unit off.
Adjust Volume level
Rotate the VOL/MENU control to adjust volume level. Rotate it clockwise to increase and antic -
lockwise to decrease the volume.
Audio Mute
Press the MUTE button to mute the volume from the system. “MUTE” will appear on the display
panel and the volume will be muted. Press the MUTE button again, or rotate or press the VOL/
MENU control to return the volume level to the setting in use before the
Mute function was activated.
Audio Controls
To adjust the bass, treble, balance and fader, press the VOL/MENU control until the appropriate
audio control appears on the display panel. Within five seconds, rotate the VOL/MENU control
to adjust the audio settings for the selected function.
Mode Button (SRC)
Press the SRC button to change between Radio, DISC (when disc is in) or AUX play.
Auxiliary Input
To access an auxiliary device:
Connect the portable audio player to the AUX interface on the front panel.
Press the SRC button to select Aux-In mode.
Press SRC again to cancel Aux-In mode and go to the next mode.
Display Selector (DISP)
This unit can display either the clock time or radio frequency/CD player functions. Ordinarily, the
radio frequency or CD player track indication is displayed, but the unit will display the time when
the DISP button is pressed. The time will display for approximately 5 seconds then return to the
radio or CD player function display.
Setting the Clock
The correct time of day can be set by pressing and holding the DISP button.
To set the clock, perform the following steps:
Turn the vehicle ignition and radio on.
Press the DISP button to view the clock.
With the clock visible on the display, press and hold the DISP button until the time display
flashes.
Within 5 seconds, rotate the VOL/MENU control counter clockwise to adjust the minutes to
the desired setting. To change the hour, rotate the VOL/MENU control clockwise to adjust
the hour to the desired time.
Display Selector (DISP)
This unit can display either the clock time or radio frequency/CD player functions. Ordinarily, the
radio frequency or CD player track indication is displayed, but the unit will display the time when
the DISP button is pressed. The time will display for approximately 5 seconds then return to the
radio or CD player function display.
1)
2)
1)
2)
3)
4)