Hyundai CMRXD 7238 SU, Инструкция по эксплуатации

Страница: 63 / 108

EN
EN - 63
BASIC OPERATION
TURN ON/OFF THE POWER
1) Press to turn on the unit.
The unit goes back to the last status after
power on.
2) Press more than two secnonds to power
off.
MUTE
Press the MUTE button to cut the sound.
Note:
• Doing the operation above again or adjusting
volume will release muting.
• Mute icon appears on the TFT during muting.
ADJUST THE VOLUME
Rotate the knob on the panel or press VOL +/ -
on the remote control to increase or decrease
the volume.
The adjustable range of volume is 00 to 40.
PLAYING SOURCE SELECTION
1) Press the MENU button on the panel or
remote control to display the home menu.
2) Rotate the knob on the panel or press
the ▲/▼ button on the remote control to
select the desired mode, press the knob
on the front panel or ENTER button on
the remote control to confirm.
Note:
• When some devices are not ready, they
cannot be selected.
• You should stop switching when the playing
source you desired has been selected and
wait for some seconds, the unit will auto
enter the playing source mode you have
selected.
WHEN PARKING BRAKE APPLIED
1) If ‘PRK SW’ cable is connected to hand
brake switch, the video display of the TFT
monitor will be controlled by driving status.
2) When the car is moving ahead, if the video
file is played, the screen appears “Parking
is enabled, No video in driving”. The above
warning screen will prevent the driver
watching images.
WHEN REVERSE DRIVING
If the rear view video camera is connected,
the unit automatically switches to CAMERA
source during reverse driving. The unit returns
to the original work mode after the reverse
driving is done.