F 910
Perfectly Flat 3D Monitor
19/20
BACK
NEXT
Contacting service
If the above troubleshooting hints do not help you find a solution to the
problem, contact an authorized service agent. If the monitor is sent for
service, use the original package if possible.
Unplug the display unit from the power outlet and contact a service agent
when:
• The monitor does not operate normally according to the operating instructions.
• The monitor exhibits a distinct change in performance.
• The monitor has been dropped or the cabinet has been damaged.
• The monitor has been exposed to rain, or water or liquid has been spilled onto
the monitor.
If you select L/R function on OSD on upper screen “Warning” mark
requiring rest will flicker five timws.
This is not defective and doesn’t give any effect to the screen.
Possible solution
If your computer is DDC compatible, the display type is
automatically correct. If, however, you need to change the display
type, you will find the display units listed under Hyundai
Electronics in the manufacture’s list.
Problem
Windows Plug and
Play does not
recognize the
monitor
!
