Hyundai BH 160, Инструкция по эксплуатации

Страница: 22 / 40

ENG - 22
• General temperature adjustment: Plug power cord into an AC230 V - 50 Hz wall outlet (do
not connect this appliance with Daily Clock timer). Push shift button to “3 position“, the power
indicator lights up and the electric blanket begins to heat. Normally, preheat takes 30 minutes.
Afterwards, you can push shift button to “2 or 1 position” according to your needs so as to
keep the right temperature when falling asleep, or to “0 position” to stop the heating (the power
indicator switches off).
• Dual control: Two people can adjust the temperature according to their needs. The individual
settings do not interfere.
• When the electric blanket is on, the control must not be covered. Make sure not to put the
control under the quilt or the pillow, or other objects, let alone close to other heating sources -
the control could be overheated and damaged.
• If you sleep on the blanket, can not be turned on all night.
CLEAN AND MAINTENANCE
DAILY CHECKS AND SAFEGUARD
To guarantee safe use of the electric blanket, pay attention to the following items:
1) Pay attention to power cords, plug, soft cords and control. If you are not sure whether it is safe
or not to use the blanket, do not use the product and send it to service center for maintenance
or check.
2) During using, check regularly that the electric blanket is leveled, fixed firmly and not fold or
rolled. Make amends to situations that influence normal use in time.
3) Often check whether there is wear and tear mark on the appliance (including the soft cord). If
so or if this appliance was used incorrectly, return the product to the service center.
4) The heating wire in the electric blanket should be spaced evenly, wired smoothly, should not
cross or fold. Do not use the device otherwise, and send it to the service center for check.
Check method: lay the electric blanket flat on the bed; touch the heating wires with hand.
5) When the electric blanket is on the bed, do not allow children to jump on the bed. If this
already happened check carefully that no part of the electric blanket is damaged.
6) When an accident or damage takes place (smoke, fire, abnormal sound, abnormal smell,
etc.), cut off the electric blanket power first (pull out the plug), then do other treatment, such
as check at the service center.
7) Do not use a blanket young children if the device is not set by a parent or guardian or if the
child was not adequately instructed how to safely operate the control of device.
FOR WASHING THE HEATING BLANKETS
Before washing the heating blankets, the users must read the instructions
Safety instructions
Before washing the heating blankets, make sure that the blankets are in a good working
condition and are not damaged.
1) Take the blankets from the bed and disconnect the detachable connector to make sure that
the controller and power cord are not connected to the blankets.
2) Put the blankets in the washing machine as when washing clothing. You can put the whole
blankets in the washing machine, however, it is necessary to disconnect and take the switch
out.
3) After 10-15 minutes of washing, stop the washing machine and let the blankets dry.
4) Make sure the blankets are dry and connect the detachable connector.
NOTES:
1) Make sure the washing machine is clean.
2) The temperature of the water in the washing machine should be in the range of 25 °C-
50 °C. If the water temperature is higher, it will damage the body of the heating blankets.
Recommended temterature is 30 °C.