8-32
Emergency situations
WARNING
Carbon monoxide
Do not leave your vehicle running in
a poorly ventilated area for extended
periods of time.
Carbon monoxide poisoning and
suffocation can occur.
Distributing the sealant
11. Immediately drive approximately
4~6miles (7~10km or, about 10min)
to evenly distribute the sealant in the
tire.
Do not exceed a speed of 80 km/h (50
mph). If possible, do not fall below a
speed of 20 km/h (12 mph).
While driving, if you experience any
unusual vibration, ride disturbance or
noise, reduce your speed and drive with
caution until you can safely pull off of
the side of the road.
Call for road side service or towing.
When you use the Tire Mobility Kit, the
tire pressure valve and wheel may be
damaged by sealant, remove the sealant
stained. We recommend that the tire
pressure valve and wheel be inspected
by an authorized HYUNDAI dealer.
Checking the tire inflation
pressure
1. After driving approximately 4
~6miles(7~10km or about 10min), stop
at a safety location.
2. Connect connection hose (10) of the
compressor directly to the tire valve.
3. Plug the compressor power cord into
the vehicle power outlet.
4. Adjust the tire inflation pressure to the
recommended tire inflation.
With the ignition switched on, proceed
as follows.
- To increase the inflation pressure :
Switch on the compressor, position
I. To check the current inflation
pressure setting, briefly switch off
the compressor.
i
Information
The pressure gauge may show higher than
actual reading when the compressor is
running. To get an accurate tire pressure,
the compressor needs to be turned off.
NOTICE
- Tire pressure valve
We recommend that you use the
sealant of tire mobility kit from an
authorized HYUNDAI dealer. The
sealant on the tire pressure valve and
wheel should be removed when you
replace the tire with a new one and
we recommend that the tire pressure
valve be inspected by an authorized
HYUNDAI dealer.
Содержание BC3
