7-39
7
Maintenance
Front windshield wiper blade
For your convenience, move the
windshield wiper blades to the serv-
ice position as follows;
After turning off the engine, move the
wiper switch to the single wiping
(MIST) position within 20 seconds
and hold the switch more than 2 sec-
onds until the wiper blade is in the
fully up position.
1. Raise the wiper arm after moving
the windshield wiper blades to the
service position.
2. Lift up the wiper blade clip. Then
pull down the blade assembly and
remove it.
3. Install the new blade assembly in
the reverse order of removal.
4. Return the wiper arm on the wind-
shield.
OIG077072L
OLF074018
OLF074019
Do not allow the wiper arm to fall
against the windshield, since it
may chip or crack the windshield.
CAUTION
OIG076018
Содержание Azera 2017
Страница 10: ......
Страница 383: ...6 22 What to do in an emergency JACKDOC14S EC Declaration of conformity for Jack ...
Страница 488: ...I Index I ...