manualshive.com logo in svg

Hyundai 50DS-7E, Руководство пользователя

Поделиться
Скачать
Hyundai 50DS-7E Скачать руководство пользователя страница 85

5-16

Travel with the fork carriage tilted back and raised only enough to fully clear the ground or 
obstacles. When the carriage (load) is in an elevated position the stability of the truck is reduced.

Do not elevate the load except during stacking.

GRADES, RAMPS, AND INCLINES...

GRADES, RAMPS, AND INCLINES...

Use special care when operating on ramps, inclines, and uneven areas. Travel slowly. Travel 
straight up and down. Do not turn or drive at an angle across an incline or ramp. Do not attempt 
to operate on grades in excess of those specified and/or recommended by the manufacturer.

When the truck is loaded, travel with the load upgrade. When the truck is empty, travel with lifting 
mechanism (mast) downgrade.

Always brake with the right foot pedal (Not with the inching pedal) when travelling down incline.

PRACTICE SAFE OPERATION EVERY TIME YOU USE YOUR TRUCK...

PRACTICE SAFE OPERATION EVERY TIME YOU USE YOUR TRUCK...

Careful driving and operation is your responsibility. Be completely familiar with all the safe driving 
and load handling techniques in this Operator’s Manual. Use common sense. Drive carefully;do 
not indulge in stunt driving or horseplay. Observe traffic rules. Watch for people and hazards. 
Slow down, be in full control of your lift truck at all times.

Follow the instructions in this manual to avoid damage to your truck or the possibility of injury to 
yourself of others.

During your work, observe all functions of your lift truck. This allows you to immediately recognize 
a problem or irregularity that could affect the safe operation of your truck.

Periodically check the gauges and warning indicator lights in the instrument panel to be sure they 
indicate a normal condition. If an abnormal condition appears bring the machine to a safe 
condition and safe location, shut off the starting switch immediately and report the problem.

Do not continue to operate a truck that has a malfunction. Stop and have it fixed.

Do not continue to operate a truck that has a malfunction. Stop and have it fixed.

Always wear your seat belt when operating your truck.

Always wear your seat belt when operating your truck.

5)

5)

(1) 

(2)

(3) 

6)

6)

(1) 

(2)

(3)

(4) 

(6)

(7) 

Содержание 50DS-7E


































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды