manualshive.com logo in svg

Hyundai 50D-9, Руководство пользователя

Приобретайте гидравлический экскаватор Hyundai 50D-9 и получите бесплатное руководство по эксплуатации. Скачать данный manual вы можете на нашем сайте. Узнайте подробную информацию о продукте, его функциях и особенностях для эффективного выполнения строительных работ. ¡Посетите {сайт} и загрузите свое руководство уже сегодня!

Поделиться
Скачать
background image

0-1

Lift trucks are specialized machines with unique operating characteristics, designed to perform a 
specific job.  Their function and operation is not like a car or ordinary truck.  They require specific 
instructions and rules for safe operation and maintenance.

Safe operation of lift trucks is of primary importance to HYUNDAI.
Our experience with lift truck accidents has shown that when accidents happen and people are killed or 
injured, the causes are:

·

Operator not properly trained

Operator not properly trained

·

Operator not experienced with lift truck operation

Operator not experienced with lift truck operation

·

Basic safety rules not followed

Basic safety rules not followed

·

Lift truck not maintained in safe operating condition

Lift truck not maintained in safe operating condition

For these reasons, HYUNDAI wants you to know about the safe operation and correct maintenance of 
your lift truck.

This manual is designed to help you operate your lift truck safely.
This manual shows and tells you about safety inspections and the important general safety rules and 
hazards of lift truck operation.  It describes the special components and features of the truck and 
explains their function.  The correct operating procedures are shown and explained.  Illustrations and 
important safety messages are included for clear understanding.  A section on maintenance and 
lubrication is included for the lift truck mechanic.

The operator's manual is not a training manual.  It is a guide to help trained and authorized operators 
safety operate their lift truck by emphasizing and illustrating the correct procedures.  However, it cannot 
cover every possible situation that may result in an accident.  You must watch for hazards in your work 
areas and avoid or correct them.  It is important that you know and understand the information in this 
manual and that you know and follow your company safety rules!
Be sure that your equipment is maintained in a safe condition.  Do not operate a damaged or 
malfunctioning truck.  Practice safe operation every time you use your lift truck.  Let's join together to set 
high standards in safety.

Remember, before you start operating this lift truck, be sure you understand all driving procedures.  It is 
your responsibility, and it is important to you and your family, to operate your lift truck safely and 
efficiently.

Be aware that the Federal Occupational Safety and Health Act (OSHA) and state laws require 

Be aware that the Federal Occupational Safety and Health Act (OSHA) and state laws require 
that  operators  be  completely  trained  in  the  safe  operation  of  lift  trucks;  It  is  also  an  (OSHA) 

that operators be completely trained in the safe operation of lift trucks; It is also an (OSHA) 
requirement that a machine inspection be performed before every shift.  If you need training in 

requirement that a machine inspection be performed before every shift.  If you need training in 
operating or inspecting your lift truck, ask your supervisor.

operating or inspecting your lift truck, ask your supervisor.

HYUNDAI lift trucks are built to take hard work, but not abuse.  They are built to be dependable, but they 
are only as safe and efficient as the operator and the persons responsible for maintaining them.  Do not 
make any repairs to this truck unless you have been trained in safe lift truck repair procedures and are 
authorized by your employer.

This manual describes procedures for operation, handling, lubrication, maintenance, checking and 
adjustment.  It will help the operator realize peak performance through effective, economical and safe 
machine operation.

A MESSAGE TO HYUNDAI LIFT TRUCK OPERATORS

A MESSAGE TO HYUNDAI LIFT TRUCK OPERATORS

Содержание 50D-9






































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 50D-9

Kaiser+Kraft QUIPO QUICK-LIFT ESGH 1000 I Operating Manual preview
QUIPO QUICK-LIFT ESGH 1000 I
Бренд: Kaiser+Kraft Страницы: 182
Kalmar DCD90-180 Technical Information preview
DCD90-180
Бренд: Kalmar Страницы: 8
Noblelift PS 30RP Instruction Handbook Manual preview
PS 30RP
Бренд: Noblelift Страницы: 27
Crown WF3000 Series Service Manual preview
WF3000 Series
Бренд: Crown Страницы: 19
Sealey PT1170H.V2 Instructions preview
PT1170H.V2
Бренд: Sealey Страницы: 2
Sealey FJ45.V3 Instructions preview
FJ45.V3
Бренд: Sealey Страницы: 2
Meijer Jumbo RBK Manual preview
Jumbo RBK
Бренд: Meijer Страницы: 13
Meijer KOOI-REACHFORK REE2-17 Instructions And Parts Manual preview
KOOI-REACHFORK REE2-17
Бренд: Meijer Страницы: 16
Meijer KOOI-REACHFORKS RE2 Instructions And Parts Manual preview
KOOI-REACHFORKS RE2
Бренд: Meijer Страницы: 25
Meijer KOOI-REACHFORK RG2 Instructions And Parts Manual preview
KOOI-REACHFORK RG2
Бренд: Meijer Страницы: 26
Clark WSRX 30 Operator'S Manual preview
WSRX 30
Бренд: Clark Страницы: 78
Clark HWXE 30 Operator'S Manual preview
HWXE 30
Бренд: Clark Страницы: 88
Clark GTS 20 D Operator'S Manual preview
GTS 20 D
Бренд: Clark Страницы: 128
Clark C15 D Operator'S Manual preview
C15 D
Бренд: Clark Страницы: 144
Clark S20 D Operator'S Manual preview
S20 D
Бренд: Clark Страницы: 170
BorMann BWR5074 Manual preview
BWR5074
Бренд: BorMann Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды