manualshive.com logo in svg

Hyundai 2008 Tiburon, Руководство пользователя, Страница: 25 / 268

Поделиться
Скачать
Hyundai 2008 Tiburon Скачать руководство пользователя страница 25

1

FEATURES OF YOUR HYUNDAI

13

B080F01F-AAT

Seat Cushion Height Adjustment
(Driver's Seat Only) (If Installed)

To raise or lower the front part of the seat
cushion, turn the knob forward or rearward.

OGK036004

B080E01F-AAT

Lumbar Support Control
(Driver's seat only) (If Installed)

The driver's seat is equipped with adjustable
lumbar support.
To increase the amount of lumbar support, pull
the lever forward.
To decrease it, push the lever toward the rear.

SOFT

OGK036005

FIRM

B130A02GK-AAT

Rear Seat Entry  (Walk in device)

The driver and front passenger's seatbacks
should be tilted to enter the rear seat.

By pulling up the walk in device lever (1) at the
left-upper side of the driver side seatback, the
seatback will tilt forward. Then pull the lock
release lever (2) up to move the seat forward.

OGK036007

Содержание 2008 Tiburon













































































































































































































































































Отзывы:

Нет отзывов