manualshive.com logo in svg

Hyundai 2007 Sonata, Руководство пользователя, Страница: 267 / 283

Поделиться
Скачать
Hyundai 2007 Sonata Скачать руководство пользователя страница 267

8

CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS

13

!

SPARE TIRE AND TOOLS

I100A01NF-AAT

Your Hyundai is delivered with the fol-
lowing:

Spare tire and wheel
Wrench bar (1)
Jack (2)
Wheel nut wrench (3)
Tool receptacle (4)

I100A01NF-A

I110A01A-AAT

SHOP MANUAL

A Hyundai Shop Manual is available from your
authorized Hyundai dealer. It's written for pro-
fessional technicians, but is simple enough for
most mechanically-inclined owners to under-
stand.

WARNING:

o Underinflated or overinflated tires

can cause poor handling, loss of
vehicle control, and sudden tire
failure leading to accidents, inju-
ries, and even death.  Always check
tires are properly inflated before
driving.  Refer to pages 2-22 and 8-
3 for proper tire pressures and
further information.

o Driving on tires with no or insuffi-

cient tread is dangerous.  Worn-
out tires can result in loss of ve-
hicle control, collisions, and in-
jury and even death.  Worn-out
tires should be replaced as soon
as possible and should never be
used for driving.  Always check
tire tread before driving your car.
Refer to this page for further infor-
mation and tread limits.

WARRANTIES FOR YOUR HYUNDAI
VEHICLE

I120A03A-AAT

Please consult your Owner’s Handbook &
Warranty Information booklet for your
vehicle’s specific warranty coverage.

Содержание 2007 Sonata




























































































































































































































































































Отзывы:

Нет отзывов