manualshive.com logo in svg

Hyundai 2006 Santa Fe, Руководство пользователя

Поделиться
Скачать
Hyundai 2006 Santa Fe Скачать руководство пользователя страница 175

2

DRIVING YOUR HYUNDAI

24

TRAILER OR VEHICLE TOWING

!

C190A01S-AAT

If you are considering towing with your car, you
should first check with your State's Department
of Motor Vehicles to determine their legal re-
quirements.
Since laws vary from State to State the require-
ments for towing trailers, cars, or other types of
vehicles or apparatus may differ. Ask your
Hyundai dealer for further details before towing.

CAUTION:

Do not do any towing with your car during
its first 1,200 miles (2,000 km) in order to
allow the engine to properly break in. Fail-
ure to heed this caution may result in seri-
ous engine or transaxle damage.

USE OF LIGHTS

C180A01A-AAT

Check your lights regularly for correct opera-
tion and always keep them clean. When driving
during the day in conditions of poor visibility, it
is helpful to drive with headlights on low beam.
This enables you to be seen, as well as to see.

HIGHER SPEED MOTORING

C170A01A-AAT

Pre-Trip Inspections

1. Tires:
Adjust the tire inflation pressures to specifica-
tion. Low tire inflation pressures will result in
overheating and possible failure of the tires.
Avoid using worn or damaged tires which may
result in reduced traction or tire failure.

NOTE:

Never exceed the maximum tire inflation
pressure shown on the tires.

2. Fuel, engine coolant and engine oil:
High speed travel consumes more fuel than
urban motoring. Do not forget to check both
engine coolant and engine oil.

3. Drive belt:
A loose or damaged drive belt may result in
overheating of the engine.

Содержание 2006 Santa Fe


























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды