background image

1

FEATURES OF YOUR HYUNDAI

118

When the eject button is pressed, the receiver
will eject the disc and REMOVE CD will be
displayed. You can now remove the disc. If the
disc is not removed, after 25 seconds, the disc
will be automatically pulled back into the re-
ceiver, If you try to push the disc back into the
receiver, before the 25 second time period is
complete, the receiver will sense an error and
will try to eject the disc several times before
stopping. You cannot repeatedly press the eject
button to eject the disc after you have tried to
push the CD in manually. The receivers 25-
second eject timer will reset at each press of
eject, which will cause the receiver to not eject
the disc until the 25-second time period has
elapsed.

Once the player stops and the disc is ejected,
remove the disc. After removing the disc, press
the VOLUME PWR knob off and then on again.
This will clear the disc-sensing feature and
enable discs to be loaded into the player again.

3. REVERSE Button

Press and hold this button reverse quickly
within a track. Release it to play the passage.
You will hear sound at a reduced volume. The
display will show elapsed time.

4. FORWARD Button

Press and hold this button to advance quickly
within a track. Release it to play the passage.
You will hear sound at a reduced volume. The
display will show elapsed time.

5. REPEAT Button

With repeat button, you can repeat one track or
an entire disc. To use repeat, do the following:

o To repeat the track you are listening to,

press and release the RPT button. RPT
track will appear on the display. Press RPT
again to turn it off.

o To repeat the disc you are listening to, press

and hold the RPT button for two seconds.
Press RPT again to turn it off.

6. RANDOM Button

With random, you can listen to the tracks in
random, rather than sequential order, on all of
the discs or on one disc.
To use random, do the following:

o Press and release the RDM button to play

the tracks on all of the discs that are loaded,
in random order. RDM will appear in the
display. Press RDM to turn if off.

o To play the tracks on the disc you are

listening to in random order, press and hold
RDM for more than two seconds. You will
hear three beeps and RDM will appear on the
display. Press RDM again to turn if off.

7. AUTO EQUALIZER

Press AUTO EQ to select the desired preset
equalization setting while playing a compact
disc. The equalization will be automatically set
whenever you play a compact disc.

8. SEEK/SCAN BUTTON
SEEK

Press the down arrow while playing a CD to go
to the start of the current track if more than ten
seconds have played. Press the up arrow to go
to the next track. If you press the button more
than once, the player will continue moving back-
ward or forward through the disc.

Содержание 2004 Santa Fe






























































































































































































































































Отзывы: